Custom firmware for the Toniebox based on the CC3200

This is the version 2 of my previous CC1101 driver library for MSP430 (/~https://github.com/abhra0897/MSP430-CC1101-Energia-Library). This time it is much better, with lots of new features, supporting all the frequencies, and works perfectly. Read the readme.md for detailed information.

Library for Texas Instruments TLC5916 and TLC5917 constant current LED sink driver for Arduino.

interrupt driven stepper controller inherited from AccelStepper

Arduino emulation library for 8-bit microcomputers based on 6502, i8080 or z80

Software I2C interface library. Does not use any platform-specific code, and has a much simpler API than standard Wire library.

Energia and ESP32 port of Henning Karlsen's UTFT library

Library to interface with Intersil/Renesas and Maxim ICM7218 and Intersil/Renesas ICM7228 LED driver chips. Compatible with Arduino and Energia.

Simple-to-use matrix keypad library.

Library for Newhaven OLED displays using US2066 controller chip. Bit-bang SPI implementation allows selection of any Arduino or MSP430 I/O pins to control the display.

Wireless temperature sensor which uses an MSP-EXP430FR2433 LaunchPad, 430BOOST-CC110L wireless transceiver, BOOSTXL-BATTPACK LiPo power source, and 430BOOST-SHARP96 low-power display.

This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using software I2C. This allows the device to be connected to any two available I/O pins instead of the hardware-specific I2C peripheral pins.

Library to support the Kentec EB-LM4F120-L35 3.5" QVGA TFT LCD BoosterPack with Parallel I/O.

Simple air quality monitor with CO2, temperature and humidity sensors. Based on MSP430 + Energia

EE-Emerge LoopMaster 2019-2020

Parallel EEPROM programmer library. The library currently supports 32Kx8 (28C256 and X28256) and 2Kx8 (28C16) EEPROMs. Other sizes may be supported in the future.

Library to interface with the 24C08 external I2C 8Kx1 EEPROM using a software I2C implementation, and can therefore use any 2 I/O pins for interfacing with the EEPROM.

Outdoor wireless weather sensor based on TI MSP-EXP430G2 LaunchPad, SENSORHUB BoosterPack and CC110L BoosterPack. Optimized for low-power operation, 2xAA cells should be able to power the device for well over a year.

Simple retro calculator using NSA1166 bubble LED display.