Open Source scanning laser rangefinder

Open Hardware scanning triangulation laser rangefinder

Alternative firmware for a cheap X-40 laser tape measure

激光雕刻写字机器人、laser、sculpture、writing、C#、STC12c5a60s2、G-Code

Laser engraver designed around a coreXY cantilever motion system.

STM VL53L1X rangefinder driver for ROS

This project introduces sample programs of the URG library. Applications using URG and URG library are also introduced here. URG is Scanning Laser Range Finder of Hokuyo Automatic Co., for robots, autonomous systems and security systems.

Unix-like operating system for CNC / Machine Control applications

Marlin Based PHR-803T UV Laser Exposer For PCB Lithography

This repository contains my works during Summer Internship. I developed a boundary condition for laser convective heat transfer generally to be used while simulating additive manufacturing process.

Simple DIY laser beam profiler

An experimental fork of Klipper for CNC / lasering in PPI mode

ProjectionBall v7.x with RP2040

👾 Vectrex emulator (vecx + SDL2 + CMake + Helios DAC)

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

VL53L0X tof 测距在 K210 的 C 和 MaixPy 驱动

Control SCANLab.de excelliSCAN from linux using RTC6 eth board (or PCIe in Windows)

Unstable laser cavities and Fractal Light; code from my 2006 MSci project

simple but effective commandline gcode modification tool for backlash and laserdelay