Controls the audio track played when the Algorithm triggers.

Controls the volume of the audio track. This is relative to the system's media volume which needs to be turned up.

The audio track to play.

Plays audio tracks with silence to maintain connections to Bluetooth audio headphones and headbands.

Resets the audio track to the default.

Vibrates the phone when the Algorithm triggers.

Sends notifications that can be configured to vibrate smartwatches when the Algorithm triggers.

Controls how the LEDs flash when the Algorithm triggers. The red, green, and blue LEDs can be combined to mix colors.

Toggles the red LED on and off.

Toggles the green LED on and off.

Toggles the blue LED on and off.

Configures the delay between turning the LEDs on and off.

Range: 1 - 1000 milliseconds.

Configures the amount of times to repeat flashing the LEDs.

Range: 1 - 32.

Monitors the video feed and triggers Audio and LEDs if 8 eye movements above the Trigger Threshold are counted within a minute. Resets if any movement above the Toss Threshold is detected.

Monitors the video feed and triggers when any motion above the Trigger Threshold is detected.

Monitors the video feed and triggers when a face is detected.

The amount of pixels that must change between video frames for the Algorithm to count it as a movement.

Range: 1 - 1000.

The amount of pixels that must change between video frames for the REM Detection algorithm to consider it a toss and turn movement and reset the eye movement count to 0.

Range: 100 - 10000.

The amount that a single pixel must changed between frames to be counted in the Trigger Threshold.

Range: 1 - 64.

The amount of neighboring pixels in a row that must be above the Pixel Threshold for a pixel to be counted in the Trigger Threshold. This filters out background noise from individual pixels changing.

Range: 1 - 64.

The delay before triggering visual and audio alerts when REM is detected.

Range: 0 - 300.

The amount of time to wait between triggers during extended REM periods.

Range: 1 - 30.

When enabled, the algorithm will only measure variances inside the region of a face if a face is detected in the video feed. This overrides some camera settings to optimize the images for face detection.

Limits the algorithm to measure variances inside the region near the eyes. This filters breathing artifacts from mouth movements.

Draws a rectangle around the face region.

Lower stages results in a faster detection rate, but less accurate.

Range: 1 - 25.

Higher threshold results in a higher detection rate, with more false positives.

Range: 0 - 1.

Lower scale factor scales-down the image more and detects smaller objects.

Range: 1 - 2.

When enabled, the camera will connect to the configured Wi-Fi Network Name using the Security Key. Any device connected to the Wi-Fi network can then access the camera's video stream on port 8080.

The name of the Wi-Fi network to connect to.

The password for the Wi-Fi network.

When enabled, the camera will broadcast a Wi-Fi access point that you can connect to from your pc or mobile device in order to stream the video feed on port 8080.

The name of the Wi-Fi access point that the device broadcasts.

The password to connect to the Wi-Fi access point.

The IP address of the INSPEC device.

Starts a second video stream on port 8082 in order to connect from Lucid Scribe Desktop in parallel.

Configures the pixel format for the camera.

• Grayscale: 8-bits per pixel (black-and-white).
• RGB565: 16-bits per pixel (color).

Mirrors the camera image.

Flips the camera image vertically.

Configures the camera image brightness.

Range: -3 to +3.

Configures the camera image contrast.

Range: -3 to +3.

Configures the camera image saturation.

Range: -3 to +3.

Resets to the default settings.