Update of User Guide needed

[marsip]

I'm a totaly new user of DCS-bios and even DCS. I'm reading the User Guide tryint to follow the steps. But some is confusing.

Step 4, So lets begin

• The text says "Click File->Examples->DcsBios->TemplateSketch", but my Arduino IDE (ver 2.1.0) has no "TemplateSketch" entry. Instead I choosed "IRQSerial"
• "Go to your saved Games folder/DCS-BIOS/doc and double-click on the file control-reference.html". It should read: Games folder/**Scripts/**DCS-BIOS/doc
• The text should read in beginning: Select the desired aircraft module in the "Module" list.
• I assume the Category Filter entries are depended on what aircraft module you have selected. The AJS37 aircraft, which I use, has no "Up Front Controller" entry, but managed to find the Master Caution lamps and reset in other place in the list.
• In the code example, before saving the sketch, has an entry: "#include <Servo.h>". My sketch file has no such entry. Maybe because I didn't find and used the TemplateSketch file.

Step 6

• "Open the connect-serial-port.cmd file which is in the DCS-BIOS folder you previously downloaded. " Confusing. What map is referenced? I found it in the unpacked zip folder "dcs-bios-master/Programs"

[WarLord211]

Hi

Step 4

• I cant find TemplateSketch in the user guide?! I found in every document IRQSerial. which guide have you read?
• Corrected
• added
• In the example is the A-10 other airplane other names. Should be clear as it is
• never heart of TemplateSketch (see point 1)

Step 6

• i rewrite this