[Keyboard] ez_maker/directpins for easy one-offs in qmk_configurator (q…

…mk#13321)

* new keyboard: handwired/directpins

* fix promicro keyboard_name

* add teensy2 and teensy2++ support

* align with handwired/onekey

* tweak pids

* add teensy 3.2 and teensy lc to directpins

* move directpins from handwired to ez_maker

* add docs for easy maker

docs/_summary.md

@@ -36,6 +36,7 @@
   * Guides
     * [Customizing Functionality](custom_quantum_functions.md)
     * [Driver Installation with Zadig](driver_installation_zadig.md)
+    * [Easy Maker for One Offs](easy_maker.md)
     * [Keymap Overview](keymap.md)
     * Development Environments
       * [Docker Guide](getting_started_docker.md)

docs/easy_maker.md

@@ -0,0 +1,31 @@
+# Easy Maker - Build One-Off Projects In Configurator
+
+Have you ever needed an easy way to program a controller, such as a Proton C or Teensy 2.0, for a one-off project you're building? QMK has you covered with the Easy Maker. Now you can create a firmware in minutes using QMK Configurator.
+
+There are different styles of Easy Maker available depending on your needs:
+
+* [Direct Pin](https://config.qmk.fm/#/?filter=ez_maker/direct) - Connect a single switch to a single pin
+* Direct Pin + Backlight (Coming Soon) - Like Direct Pin but dedicates a single pin to [Backlight](feature_backlight.md) control
+* Direct Pin + Numlock (Coming Soon) - Like Direct Pin but dedicates a single pin to the Numlock LED
+* Direct Pin + Capslock (Coming Soon) - Like Direct Pin but dedicates a single pin to the Numlock LED
+* Direct Pin + Encoder (Coming Soon) - Like Direct Pin but uses 2 pins to add a single rotary encoder
+
+## Quickstart
+
+The easiest way to get started is with the Direct Pin boards. This will assign a single key to each pin and you can short that pin to ground to activate it. Select your MCU from the Keyboard dropdown here:
+
+* <https://config.qmk.fm/#/?filter=ez_maker/direct>
+
+For more details see the [Direct Pin](#direct-pin) section.
+
+# Direct Pin
+
+As its name implies Direct Pin works by connecting one switch per pin. The other side of the switch should be connected to ground (VSS or GND.) You don't need any other components, your MCU has internal pull-up resistors so that the switch sensing can work.
+
+Here is a schematic showing how we connect a single button to pin A3 on a ProMicro:
+
+![Schematic diagram showing a ProMicro with a wire coming out of A3, connecting to the left side of a switch. Another wire comes out of the right side of the switch to connect to the Ground Plane.](https://i.imgur.com/JcDhZll.png)
+
+Once you have wired your switches you can assign keycodes to each pin and build a firmware by selecting the MCU you are using from the Keyboard dropdown. Use this link to show only Easy Maker Direct Pin:
+
+* <https://config.qmk.fm/#/?filter=ez_maker/direct>

keyboards/ez_maker/directpins/promicro/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2021 Zach White
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"

keyboards/ez_maker/directpins/promicro/info.json

@@ -0,0 +1,49 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins ProMicro",
+    "maintainer": "skullydazed",
+    "bootloader": "atmel-dfu",
+    "debounce": 5,
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["D3", null],
+            ["D2", null],
+            ["D1", "F4"],
+            ["D0", "F5"],
+            ["D4", "F6"],
+            ["C6", "F7"],
+            ["D7", "B1"],
+            ["E6", "B3"],
+            ["B4", "B2"],
+            ["B5", "B6"]
+        ]
+    },
+    "processor": "atmega32u4",
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2320",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"D3", "matrix": [0, 0], "x":0, "y":0},
+                {"label":"D2", "matrix": [1, 0], "x":0, "y":1},
+                {"label":"D1", "matrix": [2, 0], "x":0, "y":4}, {"label":"F4", "matrix": [2, 1], "x":2, "y":4},
+                {"label":"D0", "matrix": [3, 0], "x":0, "y":5}, {"label":"F5", "matrix": [3, 1], "x":2, "y":5},
+                {"label":"D4", "matrix": [4, 0], "x":0, "y":6}, {"label":"F6", "matrix": [4, 1], "x":2, "y":6},
+                {"label":"C6", "matrix": [5, 0], "x":0, "y":7}, {"label":"F7", "matrix": [5, 1], "x":2, "y":7},
+                {"label":"D7", "matrix": [6, 0], "x":0, "y":8}, {"label":"B1", "matrix": [6, 1], "x":2, "y":8},
+                {"label":"E6", "matrix": [7, 0], "x":0, "y":9}, {"label":"B3", "matrix": [7, 1], "x":2, "y":9},
+                {"label":"B4", "matrix": [8, 0], "x":0, "y":10}, {"label":"B2", "matrix": [8, 1], "x":2, "y":10},
+                {"label":"B5", "matrix": [9, 0], "x":0, "y":11}, {"label":"B6", "matrix": [9, 1], "x":2, "y":11}
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/promicro/keymaps/default/keymap.json

@@ -0,0 +1,19 @@
+{
+    "keyboard": "ez_maker/directpins/promicro",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2", "KC_3",
+            "KC_4", "KC_5",
+            "KC_6", "KC_7",
+            "KC_8", "KC_9",
+            "KC_A", "KC_B",
+            "KC_C", "KC_D",
+            "KC_E", "KC_F",
+            "KC_G", "KC_H"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/promicro/promicro.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "promicro.h"

keyboards/ez_maker/directpins/promicro/promicro.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/promicro/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Promicro Pinout Guide](https://i.imgur.com/LZ194Hf.jpg)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](/~https://github.com/skullydazed)
+* Hardware Supported: Promicro
+* Hardware Availability: Sparkfun, chinese clones
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/promicro -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/promicro -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/proton_c/info.json

@@ -0,0 +1,60 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins Proton C",
+    "maintainer": "skullydazed",
+    "debounce": 5,
+    "processor": "STM32F303",
+    "board": "QMK_PROTON_C",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["A9", null],
+            ["A10", null],
+            ["B7", "A2"],
+            ["B6", "A1"],
+            ["B5", "A0"],
+            ["B4", "B8"],
+            ["B3", "B13"],
+            ["B2", "B14"],
+            ["B1", "B15"],
+            ["B0", "B9"],
+            ["A4", "B10"],
+            ["A5", "B11"],
+            ["A6", "B12"],
+            ["A7", "A14"],
+            ["A8", "A13"],
+            ["A15", null]
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2321",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "A9", "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "A10", "matrix": [1, 0], "x": 0, "y": 1 },
+                { "label": "B7", "matrix": [2, 0], "x": 0, "y": 4 }, { "label": "A2", "matrix": [2, 1], "x": 2, "y": 4 },
+                { "label": "B6", "matrix": [3, 0], "x": 0, "y": 5 }, { "label": "A1", "matrix": [3, 1], "x": 2, "y": 5 },
+                { "label": "B5", "matrix": [4, 0], "x": 0, "y": 6 }, { "label": "A0", "matrix": [4, 1], "x": 2, "y": 6 },
+                { "label": "B4", "matrix": [5, 0], "x": 0, "y": 7 }, { "label": "B8", "matrix": [5, 1], "x": 2, "y": 7 },
+                { "label": "B3", "matrix": [6, 0], "x": 0, "y": 8 }, { "label": "B13", "matrix": [6, 1], "x": 2, "y": 8 },
+                { "label": "B2", "matrix": [7, 0], "x": 0, "y": 9 }, { "label": "B14", "matrix": [7, 1], "x": 2, "y": 9 },
+                { "label": "B1", "matrix": [8, 0], "x": 0, "y": 10 }, { "label": "B15", "matrix": [8, 1], "x": 2, "y": 10 },
+                { "label": "B0", "matrix": [9, 0], "x": 0, "y": 11 }, { "label": "B9", "matrix": [9, 1], "x": 2, "y": 11 },
+                { "label": "A4", "matrix": [10, 0], "x": 0, "y": 13 }, { "label": "B10", "matrix": [10, 1], "x": 2, "y": 13 },
+                { "label": "A5", "matrix": [11, 0], "x": 0, "y": 14 }, { "label": "B11", "matrix": [11, 1], "x": 2, "y": 14 },
+                { "label": "A6", "matrix": [12, 0], "x": 0, "y": 15 }, { "label": "B12", "matrix": [12, 1], "x": 2, "y": 15 },
+                { "label": "A7", "matrix": [13, 0], "x": 0, "y": 16 }, { "label": "A14", "matrix": [13, 1], "x": 2, "y": 16 },
+                { "label": "A8", "matrix": [14, 0], "x": 0, "y": 17 }, { "label": "A13", "matrix": [14, 1], "x": 2, "y": 17 },
+                { "label": "A15", "matrix": [15, 0], "x": 0, "y": 18 }
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/proton_c/keymaps/default/keymap.json

@@ -0,0 +1,25 @@
+{
+    "keyboard": "ez_maker/directpins/proton_c",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2", "KC_3",
+            "KC_4", "KC_5",
+            "KC_6", "KC_7",
+            "KC_8", "KC_9",
+            "KC_A", "KC_B",
+            "KC_C", "KC_D",
+            "KC_E", "KC_F",
+            "KC_G", "KC_H",
+            "KC_I", "KC_J",
+            "KC_K", "KC_L",
+            "KC_M", "KC_N",
+            "KC_O", "KC_P",
+            "KC_Q", "KC_R",
+            "KC_S"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/proton_c/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for directpins

keyboards/ez_maker/directpins/proton_c/proton_c.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "proton_c.h"

keyboards/ez_maker/directpins/proton_c/proton_c.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/proton_c/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Proton-C Pinout Guide](https://i.imgur.com/NqsqmdF.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](/~https://github.com/skullydazed)
+* Hardware Supported: Proton C
+* Hardware Availability: https://qmk.fm/proton-c
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/proton_c -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/proton_c -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/readme.md

@@ -0,0 +1,5 @@
+# DirectPins
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+This directory exists so that people creating one-offs can easily hook up their pins to switches and flash QMK to it.

keyboards/ez_maker/directpins/teensy_2/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2021 Zach White
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"