Parts you receive from disassembling the Stock KP3s are not listed in the BOM. Please make sure you don´t loose any screws! There is no guarantee that this BOM covers all parts necessary to build this Mod. It´s strongly recommendended to source higher quantities than listed here.
For the parts required to build the sailfin extruder, please refer to /~https://github.com/CroXY3D/Sailfin-Extruder For the parts required to build the Z-Probe, please refer to /~https://github.com/oldfar-t/Side-Swipe-Magnetic-Probe Note, that the Probe is mounted with 3x M3x10 & 3x M3 TNut on the Z-Axis extrusion
- 2x M3x45
- 4x M3x12
- 4x M3x8 OR M3x10
- 2x 4010 radial Fan
- 1x 3010 axial Fan
- 1x V6 Hotend
- 6x HeatInsert M3x5
- 11x M3x8
- 31x M3x12
- 2x M3x15
- 4x M3x20
- 2x M5x12
- 4x M5x30
- 2x M5x35
- 18x M3x5 Heat inserts
- 20x F695-2RS
- 1x 20T Pully
- 2x 6x1300mm Belt
- 19x M3N6 T nuts
- 6x M5 Nut
- 1x MGN12-C 220mm Linear Rail
- 4x M3x50 fully threaded
- 4x M3x5 HeatInsert
- 1x M5 Nut
- 4x M3x12
- 1x KeyBak
- 1x M5x16
- 2x F695-2RS
- 1x NEMA17
- 1x 20T Pully
- 17x M3x8
- 12x M3x5 HeatInsert
- 2x M3x12
- 1x M3x15
- 4x M3x16 (Option TriPoint Bed)
- 4x M3x12 (Option orig. Bed)
Some things will get updated (hopefully soon), some things probably won´t due to lack of time. Please note that in order to make things better, I need to be aware of issues. Feel free to open an issue, or if you fixed something, to open a PR!
This Mod comes with absolutely no warranty and there is no guarantee that developement will be continued in the future. If you want to raise awareness to any issue connected to this Mod, please open an issue here on github. In case you have any further legal questions, please read the license file.
- @screech24 for testing, building the first one and raising awareness to several issues
- @eriroh for developing the inital idea and developement support from the first scratch to the final design
- This MOD was inspired by the Armchair-Engineering P-REXZ (/~https://github.com/Armchair-Engineering/P-REXZ) and the VORON Switchwire (/~https://github.com/VoronDesign/Voron-Switchwire)
- Toolhead: Mod of /~https://github.com/KurioHonoo/Mini-AfterSherpa
- Extruder: /~https://github.com/CroXY3D/Sailfin-Extruder
- Z-probe: Mod of /~https://github.com/oldfar-t/Side-Swipe-Magnetic-Probe
- Keybak: Mod of /~https://github.com/VoronDesign/Voron-Switchwire