test: Move firewalld tests into one file

Moving firewalld related tests into one file should be convenient
for the user who doesn't care firewalld.

Signed-off-by: Mingli Yu <mingli.yu@windriver.com>

test/100-bridge-iptables.bats

@@ -1021,43 +1021,6 @@ EOF
     assert_json ".error" "invalid host ip \"abcd\" provided for port 8080" "host ip error"
 }
 
-@test "$fw_driver - test firewalld reload" {
-    setup_firewalld
-
-    run_netavark --file ${TESTSDIR}/testfiles/simplebridge.json setup $(get_container_netns_path)
-
-    check_simple_bridge_iptables
-    assert "$(<$NETAVARK_TMPDIR/config/firewall/firewall-driver)" "==" "iptables" "firewall-driver file content"
-
-    run_in_host_netns firewall-cmd --reload
-
-    # After a firewalld reload we expect rules to be deleted
-    # expected_rc=1 run_in_host_netns iptables -S NETAVARK_FORWARD
-    # There was a firewalld change in 3.0 that it no longer flushes all rules, howver we can still check if
-    # we are added to trusted.
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "" "no trusted sources"
-
-    # start reload service on start it should restore the rules
-    run_netavark_firewalld_reload
-
-    # this run in the background so give it some time to add the rules
-    sleep 1
-    check_simple_bridge_iptables
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "10.88.0.0/16" "container subnet is trusted after start"
-
-    run_in_host_netns firewall-cmd --reload
-    sleep 1
-    check_simple_bridge_iptables
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "10.88.0.0/16" "container subnet is trusted after reload"
-}
-
-@test "$fw_driver - port forwarding ipv4 - tcp with firewalld reload" {
-    test_port_fw firewalld_reload=true
-}
-
 function check_simple_bridge_iptables() {
     # check iptables POSTROUTING chain
     run_in_host_netns iptables -S POSTROUTING -t nat

test/200-bridge-firewalld.bats

@@ -329,3 +329,67 @@ function setup() {
     expected_rc=1 run_netavark -f ${TESTSDIR}/testfiles/invalid-port.json setup $(get_container_netns_path)
     assert_json ".error" "invalid host ip \"abcd\" provided for port 8080" "host ip error"
 }
+
+@test "$fw_driver - test firewalld reload" {
+    NETAVARK_FW=iptables run_netavark --file ${TESTSDIR}/testfiles/simplebridge.json setup $(get_container_netns_path)
+
+    check_simple_bridge_iptables
+    assert "$(<$NETAVARK_TMPDIR/config/firewall/firewall-driver)" "==" "iptables" "firewall-driver file content"
+
+    run_in_host_netns firewall-cmd --reload
+
+    # After a firewalld reload we expect rules to be deleted
+    # expected_rc=1 run_in_host_netns iptables -S NETAVARK_FORWARD
+    # There was a firewalld change in 3.0 that it no longer flushes all rules, howver we can still check if
+    # we are added to trusted.
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "" "no trusted sources"
+
+    # start reload service on start it should restore the rules
+    run_netavark_firewalld_reload
+
+    # this run in the background so give it some time to add the rules
+    sleep 1
+    check_simple_bridge_iptables
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "10.88.0.0/16" "container subnet is trusted after start"
+
+    run_in_host_netns firewall-cmd --reload
+    sleep 1
+    check_simple_bridge_iptables
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "10.88.0.0/16" "container subnet is trusted after reload"
+}
+
+@test "$fw_driver - port forwarding ipv4 - tcp with firewalld reload" {
+    test_port_fw firewalld_reload=true
+}
+
+@test "$fw_driver - test firewalld reload" {
+    NETAVARK_FW=nftables run_netavark --file ${TESTSDIR}/testfiles/simplebridge.json setup $(get_container_netns_path)
+
+    check_simple_bridge_nftables
+    assert "$(<$NETAVARK_TMPDIR/config/firewall/firewall-driver)" "==" "nftables" "firewall-driver file content"
+
+    run_in_host_netns firewall-cmd --reload
+
+    # There was a firewalld change in 3.0 that it no longer flushes all rules, howver we can still check if
+    # we are added to trusted.
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "" "no trusted sources"
+
+    # start reload service on start it should restore the rules
+    run_netavark_firewalld_reload
+
+    # this run in the background so give it some time to add the rules
+    sleep 1
+    check_simple_bridge_nftables
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "10.88.0.0/16" "container subnet is trusted after start"
+
+    run_in_host_netns firewall-cmd --reload
+    sleep 1
+    check_simple_bridge_nftables
+    run_in_host_netns firewall-cmd --zone=trusted --list-sources
+    assert "$output" == "10.88.0.0/16" "container subnet is trusted after reload"
+}

test/250-bridge-nftables.bats

@@ -914,41 +914,6 @@ EOF
     assert_json ".error" "invalid host ip \"abcd\" provided for port 8080" "host ip error"
 }
 
-@test "$fw_driver - test firewalld reload" {
-    setup_firewalld
-
-    run_netavark --file ${TESTSDIR}/testfiles/simplebridge.json setup $(get_container_netns_path)
-
-    check_simple_bridge_nftables
-    assert "$(<$NETAVARK_TMPDIR/config/firewall/firewall-driver)" "==" "nftables" "firewall-driver file content"
-
-    run_in_host_netns firewall-cmd --reload
-
-    # There was a firewalld change in 3.0 that it no longer flushes all rules, howver we can still check if
-    # we are added to trusted.
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "" "no trusted sources"
-
-    # start reload service on start it should restore the rules
-    run_netavark_firewalld_reload
-
-    # this run in the background so give it some time to add the rules
-    sleep 1
-    check_simple_bridge_nftables
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "10.88.0.0/16" "container subnet is trusted after start"
-
-    run_in_host_netns firewall-cmd --reload
-    sleep 1
-    check_simple_bridge_nftables
-    run_in_host_netns firewall-cmd --zone=trusted --list-sources
-    assert "$output" == "10.88.0.0/16" "container subnet is trusted after reload"
-}
-
-@test "$fw_driver - port forwarding ipv4 - tcp with firewalld reload" {
-    test_port_fw firewalld_reload=true
-}
-
 function check_simple_bridge_nftables() {
     # check nftables POSTROUTING chain
     run_in_host_netns nft list chain inet netavark POSTROUTING