spi_engine/execution: dynamic length bugfix

ip can now send multiple words per transfer with dynamic data length

library/spi_engine/spi_engine_execution/spi_engine_execution.v

@@ -97,6 +97,9 @@ localparam REG_WORD_LENGTH = 2'b10;
 localparam BIT_COUNTER_WIDTH = DATA_WIDTH > 16 ? 5 :
                                DATA_WIDTH > 8  ? 4 : 3;
 
+localparam BIT_COUNTER_CARRY = 2** (BIT_COUNTER_WIDTH + 1);
+localparam BIT_COUNTER_CLEAR = {{8{1'b1}}, {BIT_COUNTER_WIDTH{1'b0}}, 1'b1};
+
 reg sclk_int = 1'b0;
 wire sdo_int_s;
 reg sdo_t_int = 1'b0;
@@ -130,7 +133,7 @@ wire end_of_word;
 
 reg [7:0] sdi_counter = 8'b0;
 
-assign first_bit = bit_counter == 'h0;
+assign first_bit = ((bit_counter == 'h0) ||  (bit_counter == word_length));
 assign last_bit = bit_counter == word_length - 1;
 assign end_of_word = last_bit == 1'b1 && ntx_rx == 1'b1 && clk_div_last == 1'b1;
 
@@ -143,20 +146,6 @@ reg [7:0] clk_div = DEFAULT_CLK_DIV;
 wire sdo_enabled = cmd_d1[8];
 wire sdi_enabled = cmd_d1[9];
 
-wire last_sdi_bit = (sdi_counter == word_length-1);
-
-wire trigger_tx = trigger == 1'b1 && ntx_rx == 1'b0;
-wire trigger_rx = trigger == 1'b1 && ntx_rx == 1'b1;
-
-reg trigger_rx_d1 = 1'b0;
-reg trigger_rx_d2 = 1'b0;
-reg trigger_rx_d3 = 1'b0;
-
-wire trigger_rx_s = (SDI_DELAY == 2'b00) ? trigger_rx :
-                    (SDI_DELAY == 2'b01) ? trigger_rx_d1 :
-                    (SDI_DELAY == 2'b10) ? trigger_rx_d2 :
-                    (SDI_DELAY == 2'b11) ? trigger_rx_d3 : trigger_rx;
-
 // supporting max 8 SDI channel
 reg [(DATA_WIDTH-1):0] data_sdo_shift = 'h0;
 reg [(DATA_WIDTH-1):0] data_sdi_shift = 'h0;
@@ -240,16 +229,23 @@ always @(posedge clk) begin
   end
 end
 
+wire trigger_tx = trigger == 1'b1 && ntx_rx == 1'b0;
+wire trigger_rx = trigger == 1'b1 && ntx_rx == 1'b1;
 
 wire sleep_counter_compare = sleep_counter == cmd_d1[7:0] && clk_div_last == 1'b1;
 wire cs_sleep_counter_compare = cs_sleep_counter == cmd_d1[9:8] && clk_div_last == 1'b1;
 wire cs_sleep_counter_compare2 = cs_sleep_counter2 == {cmd_d1[9:8],1'b1} && clk_div_last == 1'b1;
 
 always @(posedge clk) begin
-  if (idle == 1'b1)
+  if (idle == 1'b1) begin
     counter <= 'h00;
-  else if (clk_div_last == 1'b1 && wait_for_io == 1'b0)
-    counter <= counter + (transfer_active ? 'h1 : 'h10);
+  end else if (clk_div_last == 1'b1 && wait_for_io == 1'b0) begin
+    if (bit_counter == word_length) begin
+        counter <= (counter & BIT_COUNTER_CLEAR) + (transfer_active ? 'h1 : 'h10) + BIT_COUNTER_CARRY;
+    end else begin
+      counter <= counter + (transfer_active ? 'h1 : 'h10);
+    end
+  end
 end
 
 always @(posedge clk) begin
@@ -310,8 +306,7 @@ assign sync = cmd_d1[7:0];
 always @(posedge clk) begin
   if (resetn == 1'b0)
     sdo_data_ready <= 1'b0;
-  else if (sdo_enabled == 1'b1 && first_bit == 1'b1 && trigger_tx == 1'b1 &&
-    transfer_active == 1'b1)
+  else if (sdo_enabled == 1'b1 && first_bit == 1'b1 && trigger_tx == 1'b1 && transfer_active == 1'b1)
     sdo_data_ready <= 1'b1;
   else if (sdo_data_valid == 1'b1)
     sdo_data_ready <= 1'b0;
@@ -393,12 +388,21 @@ assign sdo_int_s = data_sdo_shift[DATA_WIDTH-1];
 // next SCLK edge must be used to flop the SDI line, to compensate the overall
 // delay of the read path
 
+reg trigger_rx_d1 = 1'b0;
+reg trigger_rx_d2 = 1'b0;
+reg trigger_rx_d3 = 1'b0;
+
 always @(posedge clk) begin
   trigger_rx_d1 <= trigger_rx;
   trigger_rx_d2 <= trigger_rx_d1;
   trigger_rx_d3 <= trigger_rx_d2;
 end
 
+wire trigger_rx_s = (SDI_DELAY == 2'b00) ? trigger_rx :
+                    (SDI_DELAY == 2'b01) ? trigger_rx_d1 :
+                    (SDI_DELAY == 2'b10) ? trigger_rx_d2 :
+                    (SDI_DELAY == 2'b11) ? trigger_rx_d3 : trigger_rx;
+
 always @(posedge clk) begin
   if (inst_d1 == CMD_CHIPSELECT) begin
     data_sdi_shift <= {DATA_WIDTH{1'b0}};
@@ -442,6 +446,7 @@ assign sdi_data = (NUM_OF_SDI == 1) ? data_sdi_shift :
                                        data_sdi_shift_3, data_sdi_shift_2,
                                        data_sdi_shift_1, data_sdi_shift} : data_sdi_shift;
 
+wire last_sdi_bit = (sdi_counter == word_length-1);
 always @(posedge clk) begin
   if (resetn == 1'b0) begin
     sdi_counter <= 8'b0;
@@ -460,7 +465,7 @@ always @(posedge clk) begin
   end
 end
 
-// Additional register stage to improve timing
+// Additional register stage to imrpove timing
 always @(posedge clk) begin
   sclk <= sclk_int;
   sdo <= sdo_int_s;