Switching extruder (dondolo) without servo

Marlin/Configuration.h

@@ -270,7 +270,13 @@
   #endif
 #endif
 
-// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
+// Switch extruders by bumping the toolhead. Requires EVENT_GCODE_TOOLCHANGE_#.
+//#define MECHANICAL_SWITCHING_EXTRUDER
+
+/**
+ * A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles.
+ * Can be combined with SWITCHING_EXTRUDER.
+ */
 //#define SWITCHING_NOZZLE
 #if ENABLED(SWITCHING_NOZZLE)
   #define SWITCHING_NOZZLE_SERVO_NR 0
@@ -279,6 +285,9 @@
   #define SWITCHING_NOZZLE_SERVO_DWELL 2500         // Dwell time to wait for servo to make physical move
 #endif
 
+// Switch nozzles by bumping the toolhead. Requires EVENT_GCODE_TOOLCHANGE_#.
+//#define MECHANICAL_SWITCHING_NOZZLE
+
 /**
  * Two separate X-carriages with extruders that connect to a moving part
  * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.

Marlin/src/MarlinCore.cpp

@@ -669,7 +669,7 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
       && ELAPSED(ms, gcode.previous_move_ms + SEC_TO_MS(EXTRUDER_RUNOUT_SECONDS))
       && !planner.has_blocks_queued()
     ) {
-      #if ENABLED(SWITCHING_EXTRUDER)
+      #if HAS_SWITCHING_EXTRUDER
         bool oldstatus;
         switch (active_extruder) {
           default: oldstatus = stepper.AXIS_IS_ENABLED(E_AXIS, 0); stepper.ENABLE_EXTRUDER(0); break;
@@ -683,7 +683,7 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
             #endif // E_STEPPERS > 2
           #endif // E_STEPPERS > 1
         }
-      #else // !SWITCHING_EXTRUDER
+      #else // !HAS_SWITCHING_EXTRUDER
         bool oldstatus;
         switch (active_extruder) {
           default:
@@ -699,7 +699,7 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
       planner.set_e_position_mm(olde);
       planner.synchronize();
 
-      #if ENABLED(SWITCHING_EXTRUDER)
+      #if HAS_SWITCHING_EXTRUDER
         switch (active_extruder) {
           default: if (oldstatus) stepper.ENABLE_EXTRUDER(0); else stepper.DISABLE_EXTRUDER(0); break;
           #if E_STEPPERS > 1
@@ -709,12 +709,12 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
             #endif // E_STEPPERS > 2
           #endif // E_STEPPERS > 1
         }
-      #else // !SWITCHING_EXTRUDER
+      #else // !HAS_SWITCHING_EXTRUDER
         switch (active_extruder) {
           #define _CASE_RESTORE(N) case N: if (oldstatus) stepper.ENABLE_EXTRUDER(N); else stepper.DISABLE_EXTRUDER(N); break;
           REPEAT(E_STEPPERS, _CASE_RESTORE);
         }
-      #endif // !SWITCHING_EXTRUDER
+      #endif // !HAS_SWITCHING_EXTRUDER
 
       gcode.reset_stepper_timeout(ms);
     }

Marlin/src/inc/Conditionals_LCD.h

@@ -613,7 +613,9 @@
   #undef TEMP_SENSOR_7
   #undef SINGLENOZZLE
   #undef SWITCHING_EXTRUDER
+  #undef MECHANICAL_SWITCHING_EXTRUDER
   #undef SWITCHING_NOZZLE
+  #undef MECHANICAL_SWITCHING_NOZZLE
   #undef MIXING_EXTRUDER
   #undef HOTEND_IDLE_TIMEOUT
   #undef DISABLE_E
@@ -629,12 +631,19 @@
 #define E_TERN_(N)  TERN_(HAS_MULTI_EXTRUDER, N)
 #define E_TERN0(N)  TERN0(HAS_MULTI_EXTRUDER, N)
 
+#if EITHER(SWITCHING_EXTRUDER, MECHANICAL_SWITCHING_EXTRUDER)
+  #define HAS_SWITCHING_EXTRUDER 1
+#endif
+#if EITHER(SWITCHING_NOZZLE, MECHANICAL_SWITCHING_NOZZLE)
+  #define HAS_SWITCHING_NOZZLE 1
+#endif
+
 #if ENABLED(E_DUAL_STEPPER_DRIVERS) // E0/E1 steppers act in tandem as E0
 
   #define E_STEPPERS      2
   #define E_MANUAL        1
 
-#elif ENABLED(SWITCHING_EXTRUDER)   // One stepper for every two EXTRUDERS
+#elif HAS_SWITCHING_EXTRUDER        // One stepper for every two EXTRUDERS
 
   #if EXTRUDERS > 4
     #define E_STEPPERS    3
@@ -643,7 +652,7 @@
   #else
     #define E_STEPPERS    1
   #endif
-  #if DISABLED(SWITCHING_NOZZLE)
+  #if !HAS_SWITCHING_NOZZLE
     #define HOTENDS       E_STEPPERS
   #endif
 
@@ -668,7 +677,7 @@
 #endif
 
 // No inactive extruders with SWITCHING_NOZZLE or Průša MMU1
-#if ENABLED(SWITCHING_NOZZLE) || HAS_PRUSA_MMU1
+#if HAS_SWITCHING_NOZZLE || HAS_PRUSA_MMU1
   #undef DISABLE_INACTIVE_EXTRUDER
 #endif
 
@@ -1064,7 +1073,7 @@
 #endif
 
 // Switching extruder has its own servo?
-#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
+#if ENABLED(SWITCHING_EXTRUDER) && (!HAS_SWITCHING_NOZZLE || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
   #define DO_SWITCH_EXTRUDER 1
 #endif
 

Marlin/src/inc/Conditionals_adv.h

@@ -30,26 +30,26 @@
   #define AXIS_RELATIVE_MODES {}
 #endif
 
-#ifdef SWITCHING_NOZZLE_E1_SERVO_NR
+#if defined(SWITCHING_NOZZLE_E1_SERVO_NR) && DISABLED(MECHANICAL_SWITCHING_NOZZLE)
   #define SWITCHING_NOZZLE_TWO_SERVOS 1
 #endif
 
 // Determine NUM_SERVOS if none was supplied
 #ifndef NUM_SERVOS
   #define NUM_SERVOS 0
-  #if ANY(HAS_Z_SERVO_PROBE, CHAMBER_VENT, SWITCHING_TOOLHEAD, SWITCHING_EXTRUDER, SWITCHING_NOZZLE, SPINDLE_SERVO)
-    #if NUM_SERVOS <= Z_PROBE_SERVO_NR
-      #undef NUM_SERVOS
-      #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
-    #endif
-    #if NUM_SERVOS <= CHAMBER_VENT_SERVO_NR
-      #undef NUM_SERVOS
-      #define NUM_SERVOS (CHAMBER_VENT_SERVO_NR + 1)
-    #endif
-    #if NUM_SERVOS <= SWITCHING_TOOLHEAD_SERVO_NR
-      #undef NUM_SERVOS
-      #define NUM_SERVOS (SWITCHING_TOOLHEAD_SERVO_NR + 1)
-    #endif
+  #if HAS_Z_SERVO_PROBE && NUM_SERVOS <= Z_PROBE_SERVO_NR
+    #undef NUM_SERVOS
+    #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
+  #endif
+  #if ENABLED(CHAMBER_VENT) && NUM_SERVOS <= CHAMBER_VENT_SERVO_NR
+    #undef NUM_SERVOS
+    #define NUM_SERVOS (CHAMBER_VENT_SERVO_NR + 1)
+  #endif
+  #if ENABLED(SWITCHING_TOOLHEAD) && NUM_SERVOS <= SWITCHING_TOOLHEAD_SERVO_NR
+    #undef NUM_SERVOS
+    #define NUM_SERVOS (SWITCHING_TOOLHEAD_SERVO_NR + 1)
+  #endif
+  #if ENABLED(SWITCHING_NOZZLE)
     #if NUM_SERVOS <= SWITCHING_NOZZLE_SERVO_NR
       #undef NUM_SERVOS
       #define NUM_SERVOS (SWITCHING_NOZZLE_SERVO_NR + 1)
@@ -58,6 +58,8 @@
       #undef NUM_SERVOS
       #define NUM_SERVOS (SWITCHING_NOZZLE_E1_SERVO_NR + 1)
     #endif
+  #endif
+  #if ENABLED(SWITCHING_EXTRUDER)
     #if NUM_SERVOS <= SWITCHING_EXTRUDER_SERVO_NR
       #undef NUM_SERVOS
       #define NUM_SERVOS (SWITCHING_EXTRUDER_SERVO_NR + 1)
@@ -66,12 +68,12 @@
       #undef NUM_SERVOS
       #define NUM_SERVOS (SWITCHING_EXTRUDER_E23_SERVO_NR + 1)
     #endif
-    #if NUM_SERVOS <= SPINDLE_SERVO_NR
-      #undef NUM_SERVOS
-      #define NUM_SERVOS (SPINDLE_SERVO_NR + 1)
-    #endif
   #endif
-#endif
+  #if ENABLED(SPINDLE_SERVO) && NUM_SERVOS <= SPINDLE_SERVO_NR
+    #undef NUM_SERVOS
+    #define NUM_SERVOS (SPINDLE_SERVO_NR + 1)
+  #endif
+#endif // !defined(NUM_SERVOS)
 
 // Convenience override for a BLTouch alone
 #if ENABLED(BLTOUCH) && NUM_SERVOS == 1

Marlin/src/inc/SanityCheck.h

@@ -1269,20 +1269,34 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
 /**
  * A Dual Nozzle carriage with switching servo
  */
-#if ENABLED(SWITCHING_NOZZLE)
-  #if ENABLED(DUAL_X_CARRIAGE)
+#if BOTH(SWITCHING_NOZZLE, MECHANICAL_SWITCHING_NOZZLE)
+  #error "Enable only one of SWITCHING_NOZZLE or MECHANICAL_SWITCHING_NOZZLE."
+#elif ENABLED(MECHANICAL_SWITCHING_NOZZLE)
+  #if EXTRUDERS != 2
+    #error "MECHANICAL_SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
+  #elif ENABLED(DUAL_X_CARRIAGE)
+    #error "MECHANICAL_SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible."
+  #elif ENABLED(SINGLENOZZLE)
+    #error "MECHANICAL_SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
+  #elif HAS_PRUSA_MMU2
+    #error "MECHANICAL_SWITCHING_NOZZLE and PRUSA_MMU2(S) are incompatible."
+  #elif !defined(EVENT_GCODE_TOOLCHANGE_T0)
+    #error "MECHANICAL_SWITCHING_NOZZLE requires EVENT_GCODE_TOOLCHANGE_T0."
+  #elif !defined(EVENT_GCODE_TOOLCHANGE_T1)
+    #error "MECHANICAL_SWITCHING_NOZZLE requires EVENT_GCODE_TOOLCHANGE_T1."
+  #endif
+#elif ENABLED(SWITCHING_NOZZLE)
+  #if EXTRUDERS != 2
+    #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
+  #elif ENABLED(DUAL_X_CARRIAGE)
     #error "SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible."
   #elif ENABLED(SINGLENOZZLE)
     #error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
   #elif HAS_PRUSA_MMU2
     #error "SWITCHING_NOZZLE and PRUSA_MMU2(S) are incompatible."
-  #elif EXTRUDERS != 2
-    #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
   #elif NUM_SERVOS < 1
     #error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
-  #endif
-
-  #ifndef SWITCHING_NOZZLE_SERVO_NR
+  #elif !defined(SWITCHING_NOZZLE_SERVO_NR)
     #error "SWITCHING_NOZZLE requires SWITCHING_NOZZLE_SERVO_NR."
   #elif SWITCHING_NOZZLE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
     #error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
@@ -1293,7 +1307,6 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
   #elif SWITCHING_NOZZLE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
     #error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
   #endif
-
   #ifdef SWITCHING_NOZZLE_E1_SERVO_NR
     #if SWITCHING_NOZZLE_E1_SERVO_NR == SWITCHING_NOZZLE_SERVO_NR
       #error "SWITCHING_NOZZLE_E1_SERVO_NR must be different from SWITCHING_NOZZLE_SERVO_NR."
@@ -1307,14 +1320,26 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
       #error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
     #endif
   #endif
-#endif
+#endif // SWITCHING_NOZZLE
 
 /**
  * Single Stepper Dual Extruder with switching servo
  */
-#if ENABLED(SWITCHING_EXTRUDER)
+#if BOTH(SWITCHING_EXTRUDER, MECHANICAL_SWITCHING_EXTRUDER)
+  #error "Enable only one of SWITCHING_EXTRUDER or MECHANICAL_SWITCHING_EXTRUDER."
+#elif ENABLED(MECHANICAL_SWITCHING_EXTRUDER)
+  #if EXTRUDERS < 2
+    #error "MECHANICAL_SWITCHING_EXTRUDER requires EXTRUDERS >= 2."
+  #elif !defined(EVENT_GCODE_TOOLCHANGE_T0)
+    #error "MECHANICAL_SWITCHING_EXTRUDER requires EVENT_GCODE_TOOLCHANGE_T0."
+  #elif !defined(EVENT_GCODE_TOOLCHANGE_T1)
+    #error "MECHANICAL_SWITCHING_EXTRUDER requires EVENT_GCODE_TOOLCHANGE_T1."
+  #endif
+#elif ENABLED(SWITCHING_EXTRUDER)
   #if NUM_SERVOS < 1
     #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
+  #elif !defined(SWITCHING_EXTRUDER_SERVO_NR)
+    #error "SWITCHING_EXTRUDER requires SWITCHING_EXTRUDER_SERVO_NR."
   #elif SWITCHING_EXTRUDER_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
     #error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
   #elif SWITCHING_EXTRUDER_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
@@ -1338,8 +1363,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
     #elif SWITCHING_EXTRUDER_E23_SERVO_NR == SWITCHING_EXTRUDER_SERVO_NR
       #error "SWITCHING_EXTRUDER_E23_SERVO_NR should be a different extruder from SWITCHING_EXTRUDER_SERVO_NR."
     #endif
+  #elif EXTRUDERS < 2
+    #error "SWITCHING_EXTRUDER requires EXTRUDERS >= 2."
   #endif
-#endif
+#endif // SWITCHING_EXTRUDER
 
 /**
  * Mixing Extruder requirements
@@ -1351,8 +1378,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
     #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
   #elif ENABLED(FILAMENT_WIDTH_SENSOR)
     #error "MIXING_EXTRUDER is incompatible with FILAMENT_WIDTH_SENSOR. Comment out this line to use it anyway."
-  #elif ENABLED(SWITCHING_EXTRUDER)
-    #error "Please select either MIXING_EXTRUDER or SWITCHING_EXTRUDER, not both."
+  #elif HAS_SWITCHING_EXTRUDER
+    #error "MIXING_EXTRUDER is incompatible with (MECHANICAL_)SWITCHING_EXTRUDER."
   #elif ENABLED(SINGLENOZZLE)
     #error "MIXING_EXTRUDER is incompatible with SINGLENOZZLE."
   #elif ENABLED(DISABLE_INACTIVE_EXTRUDER)
@@ -1370,8 +1397,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
     #error "E_DUAL_STEPPER_DRIVERS can only be used with EXTRUDERS set to 1."
   #elif ENABLED(MIXING_EXTRUDER)
     #error "E_DUAL_STEPPER_DRIVERS is incompatible with MIXING_EXTRUDER."
-  #elif ENABLED(SWITCHING_EXTRUDER)
-    #error "E_DUAL_STEPPER_DRIVERS is incompatible with SWITCHING_EXTRUDER."
+  #elif HAS_SWITCHING_EXTRUDER
+    #error "E_DUAL_STEPPER_DRIVERS is incompatible with (MECHANICAL_)SWITCHING_EXTRUDER."
   #endif
 #endif
 
@@ -2733,8 +2760,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
     #error "MULTI_NOZZLE_DUPLICATION is incompatible with DUAL_X_CARRIAGE."
   #elif ENABLED(MIXING_EXTRUDER)
     #error "MULTI_NOZZLE_DUPLICATION is incompatible with MIXING_EXTRUDER."
-  #elif ENABLED(SWITCHING_EXTRUDER)
-    #error "MULTI_NOZZLE_DUPLICATION is incompatible with SWITCHING_EXTRUDER."
+  #elif HAS_SWITCHING_EXTRUDER
+    #error "MULTI_NOZZLE_DUPLICATION is incompatible with (MECHANICAL_)SWITCHING_EXTRUDER."
   #elif HOTENDS < 2
     #error "MULTI_NOZZLE_DUPLICATION requires 2 or more hotends."
   #endif

Marlin/src/lcd/menu/menu_motion.cpp

@@ -232,7 +232,7 @@ void menu_move() {
   else
     GCODES_ITEM(MSG_AUTO_HOME, FPSTR(G28_STR));
 
-  #if ANY(SWITCHING_EXTRUDER, SWITCHING_NOZZLE, MAGNETIC_SWITCHING_TOOLHEAD)
+  #if ANY(HAS_SWITCHING_EXTRUDER, HAS_SWITCHING_NOZZLE, MAGNETIC_SWITCHING_TOOLHEAD)
 
     #if EXTRUDERS >= 4
       switch (active_extruder) {
@@ -265,7 +265,7 @@ void menu_move() {
 
     #define SUBMENU_MOVE_E(N) SUBMENU_N(N, MSG_MOVE_EN, []{ _menu_move_distance(E_AXIS, []{ lcd_move_e(N); }, N); });
 
-    #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
+    #if HAS_SWITCHING_EXTRUDER || HAS_SWITCHING_NOZZLE
 
       // ...and the non-switching
       #if E_MANUAL == 7 || E_MANUAL == 5 || E_MANUAL == 3

Marlin/src/module/planner.cpp

@@ -2283,7 +2283,7 @@ bool Planner::_populate_block(
           if (g_uc_extruder_last_move[i]) g_uc_extruder_last_move[i]--;
 
         // Switching Extruder uses one E stepper motor per two nozzles
-        #define E_STEPPER_INDEX(E) TERN(SWITCHING_EXTRUDER, (E) / 2, E)
+        #define E_STEPPER_INDEX(E) TERN(HAS_SWITCHING_EXTRUDER, (E) / 2, E)
 
         // Enable all (i.e., both) E steppers for IDEX-style duplication, but only active E steppers for multi-nozzle (i.e., single wide X carriage) duplication
         #define _IS_DUPE(N) TERN0(HAS_DUPLICATION_MODE, (extruder_duplication_enabled && TERN1(MULTI_NOZZLE_DUPLICATION, TEST(duplication_e_mask, N))))

Marlin/src/module/stepper/indirection.h

@@ -454,7 +454,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 /**
  * Extruder indirection for the single E axis
  */
-#if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index
+#if HAS_SWITCHING_EXTRUDER // One stepper driver per two extruders, reversed on odd index
   #if EXTRUDERS > 7
     #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else if (E < 6) { E2_STEP_WRITE(V); } else { E3_STEP_WRITE(V); } }while(0)
     #define   NORM_E_DIR(E)   do{ switch (E) { \

Marlin/src/module/temperature.h

@@ -748,7 +748,7 @@ class Temperature {
       static raw_adc_t mintemp_raw_COOLER, maxtemp_raw_COOLER;
     #endif
 
-    #if HAS_TEMP_BOARD && ENABLED(THERMAL_PROTECTION_BOARD)
+    #if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD)
       static raw_adc_t mintemp_raw_BOARD, maxtemp_raw_BOARD;
     #endif