repush.sh script stuck for ever

[GBZH]

Hi,
I have installed your scripts on my laptop running under Linux Ubuntu 20.04.
I enabled the USB Web UI on the remarkable 2 tablet.
Typing the following command:
reMarkable/scripts/host/repush.sh -r xxx.xxx.x.xx wcs.pdf
root@xxx.xxx.x.xx's password:
with good IP address and password, nothing happens, no error message and no file copied on the tablet. It stays there forever.
After killing the command with CTRL c, I get an error message if I try to rerun the command w/o restarting the reMarkable 2 tablet:
repush: Port 9000 is already used by a different process!

Any hints on how to solve this problem is very welcome.
Thanks,
Gilles

[trou]

This is probably issue #31, you can try the fix in the PR: #35

[GBZH]

Hi, Many thanks, downloading your new script solved the problem when the tablet is connected to the laptop and when copying with the following command : repush.sh file.pdf But the command is still stuck after entering password when tablet is connected and using : repush.sh -r xxx.xxx.x.xx file.pdf

…

De: "Raphaël Rigo" ***@***.***> À: "reHackable/scripts" ***@***.***> Cc: "Gilles Quéméner" ***@***.***>, "Author" ***@***.***> Envoyé: Vendredi 12 Février 2021 00:02:24 Objet: Re: [reHackable/scripts] repush.sh script stuck for ever (#34) This is probably issue [ #31 | #31 ] , you can try the fix in the PR: [ #35 | #35 ] — You are receiving this because you authored the thread. Reply to this email directly, [ #34 (comment) | view it on GitHub ] , or [ /~https://github.com/notifications/unsubscribe-auth/AAQU2CZEM7VVKKS7BLQYOUTS6ROYBANCNFSM4XPBCBKQ | unsubscribe ] .

[trou]

It's probably because the Web UI is disabled when the rM is disconnected.
Can you post the output of bash -x repush.sh -r x.x.x.x file.pdf ?

[GBZH]

Here are the outputs that you want : 1) First test: tablet is connected to laptop and USB interface is OFF ~$ bash -x reMarkable/scripts/host/repush.sh -r xxx.xxx.x.xx wcs.pdf + VERSION=4.1 + SSH_ADDRESS=10.11.99.1 + WEBUI_ADDRESS=10.11.99.1:80 + PORT=9000 + shopt -s nullglob + getopts :vhdr:p⭕ opt + case "$opt" in + SSH_ADDRESS=xxx.xxx.x.xx + REMOTE=1 + getopts :vhdr:p⭕ opt + shift 2 + '[' -z wcs.pdf ']' + for f in "$@" + check_file wcs.pdf ++ file -F '|' wcs.pdf + file_cmd_output='wcs.pdf| PDF document, version 1.1' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| directory' + '[' '!' -e wcs.pdf ']' + '[' -z ']' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| PDF' + '[' -z ']' + echo wcs.pdf + grep -qi '\.pdf$' + echo wcs.pdf + grep -q '"' + return 1 + '[' 1 -eq 0 ']' + '[' 1 ']' + nc -z localhost 9000 + echo 'repush: Port 9000 is already used by a different process!' repush: Port 9000 is already used by a different process! + exit -1 2) Second test: tablet is connected to laptop and USB interface is ON ~$ bash -x reMarkable/scripts/host/repush.sh -r xxx.xxx.x.xx wcs.pdf + VERSION=4.1 + SSH_ADDRESS=10.11.99.1 + WEBUI_ADDRESS=10.11.99.1:80 + PORT=9000 + shopt -s nullglob + getopts :vhdr:p⭕ opt + case "$opt" in + SSH_ADDRESS=xxx.xxx.x.xx + REMOTE=1 + getopts :vhdr:p⭕ opt + shift 2 + '[' -z wcs.pdf ']' + for f in "$@" + check_file wcs.pdf ++ file -F '|' wcs.pdf + file_cmd_output='wcs.pdf| PDF document, version 1.1' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| directory' + '[' '!' -e wcs.pdf ']' + '[' -z ']' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| PDF' + '[' -z ']' + echo wcs.pdf + grep -qi '\.pdf$' + echo wcs.pdf + grep -q '"' + return 1 + '[' 1 -eq 0 ']' + '[' 1 ']' + nc -z localhost 9000 + echo 'repush: Port 9000 is already used by a different process!' repush: Port 9000 is already used by a different process! + exit -1 3) Third test: tablet is not connected to laptop and therefore USB interface is OFF by default ~$ bash -x reMarkable/scripts/host/repush.sh -r xxx.xxx.x.xx wcs.pdf + VERSION=4.1 + SSH_ADDRESS=10.11.99.1 + WEBUI_ADDRESS=10.11.99.1:80 + PORT=9000 + shopt -s nullglob + getopts :vhdr:p⭕ opt + case "$opt" in + SSH_ADDRESS=xxx.xxx.x.xx + REMOTE=1 + getopts :vhdr:p⭕ opt + shift 2 + '[' -z wcs.pdf ']' + for f in "$@" + check_file wcs.pdf ++ file -F '|' wcs.pdf + file_cmd_output='wcs.pdf| PDF document, version 1.1' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| directory' + '[' '!' -e wcs.pdf ']' + '[' -z ']' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| PDF' + '[' -z ']' + echo wcs.pdf + grep -qi '\.pdf$' + echo wcs.pdf + grep -q '"' + return 1 + '[' 1 -eq 0 ']' + '[' 1 ']' + nc -z localhost 9000 + echo 'repush: Port 9000 is already used by a different process!' repush: Port 9000 is already used by a different process! + exit -1 Gilles

…

De: "Raphaël Rigo" ***@***.***> À: "reHackable/scripts" ***@***.***> Cc: "Gilles Quéméner" ***@***.***>, "Author" ***@***.***> Envoyé: Vendredi 12 Février 2021 09:33:49 Objet: Re: [reHackable/scripts] repush.sh script stuck for ever (#34) It's probably because the Web UI is disabled when the rM is disconnected. Can you post the output of bash -x repush.sh -r x.x.x.x file.pdf ? — You are receiving this because you authored the thread. Reply to this email directly, [ #34 (comment) | view it on GitHub ] , or [ /~https://github.com/notifications/unsubscribe-auth/AAQU2CYWZXA4W7CA7ACO373S6TRW3ANCNFSM4XPBCBKQ | unsubscribe ] .

[trou]

As the script outputs: repush: Port 9000 is already used by a different process!, you have a leftover SSH session, kill it.

[GBZH]

So, I have killed the ssh (not the ssh-agent from the list of ps -u command) and reran your command. I was asked a first time for the password, but connection was refused, then I have entered it a second time and it worked (note however that it was correctly typed the first time). ~$ bash -x reMarkable/scripts/host/repush.sh -r xxx.xxx.x.xx wcs.pdf + VERSION=4.1 + SSH_ADDRESS=10.11.99.1 + WEBUI_ADDRESS=10.11.99.1:80 + PORT=9000 + shopt -s nullglob + getopts :vhdr:p⭕ opt + case "$opt" in + SSH_ADDRESS=xxx.xxx.x.xx + REMOTE=1 + getopts :vhdr:p⭕ opt + shift 2 + '[' -z wcs.pdf ']' + for f in "$@" + check_file wcs.pdf ++ file -F '|' wcs.pdf + file_cmd_output='wcs.pdf| PDF document, version 1.1' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| directory' + '[' '!' -e wcs.pdf ']' + '[' -z ']' + grep -q '| PDF' + echo 'wcs.pdf| PDF document, version 1.1' + '[' -z ']' + grep -qi '\.pdf$' + echo wcs.pdf + echo wcs.pdf + grep -q '"' + return 1 + '[' 1 -eq 0 ']' + '[' 1 ']' + nc -z localhost 9000 + ssh -o ConnectTimeout=5 -M -S remarkable-ssh -q -f -L 9000:10.11.99.1:80 root@xxx.xxx.x.xx -N root@xxx.xxx.x.xx's password: + SSH_RET=0 + WEBUI_ADDRESS=localhost:9000 + '[' 0 -ne 0 ']' + for f in "$@" ++ basename wcs.pdf pdf + uuid_of_root_file wcs. + RET_UUID= + rmtgrep lF '"visibleName": "wcs."' '~/.local/share/remarkable/xochitl/*.metadata' + escaped_regex='\"visibleName\": \"wcs.\"' ++ ssh -S remarkable-ssh root@xxx.xxx.x.xx 'grep -lF "\"visibleName\": \"wcs.\"" ~/.local/share/remarkable/xochitl/*.metadata' Control socket connect(remarkable-ssh): Connection refused root@xxx.xxx.x.xx's password: + RET_MATCH= + matches_by_name= + '[' -z '' ']' + return + '[' '!' -z ']' + rm -rf /tmp/repush + mkdir -p /tmp/repush + OUTPUT_UUID= + '[' '' ']' + TOTAL=0 + SUCCESS=0 + for f in "$@" + ROOT_UUID= + push wcs.pdf + (( TOTAL++ )) ++ file -F '|' wcs.pdf + file_cmd_output='wcs.pdf| PDF document, version 1.1' + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| \(PDF\|directory\)' + extension=pdf + echo 'wcs.pdf| PDF document, version 1.1' + grep -q '| directory' + directory= ++ basename wcs.pdf .pdf + placeholder_basename=wcs + '[' ']' + placeholder=/tmp/repush/wcs + [[ pdf == \p\d\f ]] + create_placeholder_pdf /tmp/repush/wcs + echo %PDF-1. + echo '1 0 obj<</Pages 2 0 R>>endobj' + echo '2 0 obj<</Kids[3 0 R]/Count 1>>endobj' + echo '3 0 obj<</Parent 2 0 R>>endobj' + echo -n 'trailer <</Root 1 0 R>>' + true + curl --connect-timeout 2 --silent --output /dev/null --form 'file=@"/tmp/repush/wcs"' http://localhost:9000/upload Gilles

…

De: "Raphaël Rigo" ***@***.***> À: "reHackable/scripts" ***@***.***> Cc: "Gilles Quéméner" ***@***.***>, "Author" ***@***.***> Envoyé: Vendredi 12 Février 2021 09:52:21 Objet: Re: [reHackable/scripts] repush.sh script stuck for ever (#34) As the script outputs: repush: Port 9000 is already used by a different process! , you have a leftover SSH session, kill it. — You are receiving this because you authored the thread. Reply to this email directly, [ #34 (comment) | view it on GitHub ] , or [ /~https://github.com/notifications/unsubscribe-auth/AAQU2C37TRHLTTPPPODJ4ITS6TT4LANCNFSM4XPBCBKQ | unsubscribe ] .

[trou]

the script does not work without the cable