Pump controller ST

/**
 *  Copyright 2015 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */

// user input preferences on settings page
preferences {
    input name: "deviceId", type: "text", title: "Device ID", required: true
    input name: "token", type: "password", title: "Access Token", required: true
    input name: "RPMVar", type: "text", title: "RPM Variable", required: true, defaultValue: "PumpRPM"
    input name: "wattVar", type: "text", title: "WATT Variable", required: true, defaultValue: "PowerUse"
    input name: "valveFunc", type: "text", title: "Valve 1 Function", required: true, defaultValue: "valves"
    input name: "pumpFunc", type: "text", title: "Pump Speed Function", required: true, defaultValue: "PumpSpeed"
    }

// name the capabilities Attributes and author
metadata {
	definition (name: "Simulated Pool Controller Test Version 2", namespace: "brennonsapps", author: "bscuderi") {
		capability "Actuator"
		capability "Button"
		capability "Sensor"
        attribute "auto", "enum"
        attribute "chemical", "enum"
        attribute "threeway", "string"
        capability "Power Meter"
        capability "Polling"
        capability "Refresh"
        capability "Carbon Dioxide Measurement"
        capability "Switch"

// register the custom commands
        command "speed0"
        command "speed1250"
        command "speed1500"
        command "speed1750"
        command "speed2000"
        command "speed2500"
        command "speed3000"
        command "speed3450"
        command "autoon"
        command "autooff"        
        command "chemicalon"
        command "chemicaloff"
        command "cleanervalveposition"
        command "mainvalveposition"
        command "aeratorvalveposition"
        command "aerator"
        command "mainreturn"
        command "floorcleaner"
        command "getWATT"
	}

// I have no clue why this was on the simulated minimote device handler
	simulator {
		status "button 1 pushed":  "command: 2001, payload: 01"
		status "button 5 pushed":  "command: 2001, payload: 15"
		status "button 2 pushed":  "command: 2001, payload: 29"
		status "button 6 pushed":  "command: 2001, payload: 3D"
		status "button 3 pushed":  "command: 2001, payload: 51"
		status "button 7 pushed":  "command: 2001, payload: 65"
		status "button 4 pushed":  "command: 2001, payload: 79"
		status "button 8 pushed":  "command: 2001, payload: 8D"
		status "wakeup":  "command: 8407, payload: "
	}
	
 // Tiles   
    tiles {
// main switch tile with secondary RPM and Power		     
        multiAttributeTile(name: "switch", type: "lighting", width: 4, height: 2, canChangeIcon: true) {
			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
				attributeState "on", label: 'On', action: "switch.off", icon: "st.Health & Wellness.health2", backgroundColor: "#aaaaff", nextState:"turningOff"
				attributeState "off", label: 'Off', action: "switch.on", icon: "st.Health & Wellness.health2", backgroundColor: "#ffffff", nextState:"turningOn"
				// handle state changes so that it waits for a succesful response to turn on and off the switch
                attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.Health & Wellness.health2", backgroundColor: "#ddddff"
				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.Health & Wellness.health2", backgroundColor: "#888888"
			}
			tileAttribute("device.carbonDioxide", key: "SECONDARY_CONTROL") {
				attributeState "carbonDioxide", label: '   ${currentValue} RPM', icon: "https://cdn0.iconfinder.com/data/icons/elite-vehicle-navigation/512/speedometer-512.png"
			}
             tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
				attributeState "power", label: '                                                              ${currentValue} Watts'
			}
		}
 
 // Tile that shows on the things page      
       valueTile("mainthing", "device.carbonDioxide", width: 1, height: 1) {
            state("carbonDioxide", icon: "st.Health & Wellness.health2", label:'${currentValue} RPM',
            	    backgroundColors:[    
                    [value:    0, color: "#dddddd"],
                    [value: 1000, color: "#1e9cbb"],
                    [value: 1250, color: "#90d2a7"],
                    [value: 1500, color: "#44b621"],
                    [value: 2000, color: "#f1d801"],
                    [value: 2500, color: "#d04e00"],
                    [value: 3000, color: "#bc2323"],
                    [value: 3450, color: "#ee2323"]
                    ]
         )           
        }
        
  // Automatic mode virtual switch
       standardTile("auto", "device.auto", width: 2, height: 2,  canChangeBackground: true) {
         		state "on", label: "Auto", action: "autooff", icon: "st.Health & Wellness.health7", backgroundColor: "#aaffaa"
        		state "off", label: "Manual", action: "autoon", icon: "st.Health & Wellness.health7", backgroundColor: "#ffaaaa"
        }
 // Valve 1 switch      
       standardTile("cleaners", "device.cleaners", width: 2, height: 2, canChangeBackground: true) {
         		state "on", label: "Cleaner", action: "cleanoff", icon: "st.Appliances.appliances13", backgroundColor: "#aaffaa"
        		state "off", label: "Cleaner", action: "cleanon", icon: "st.Appliances.appliances13", backgroundColor: "#ffffff"
        }
 // Valve 2 switch       
        standardTile("aerator", "device.aerator", width: 2, height: 2,  canChangeBackground: true) {
         		state "on", label: "Aerator", action: "aeratoroff", icon: "st.Bath.bath13", backgroundColor: "#aaffaa"
        		state "off", label: "Aerator", action: "aeratoron", icon: "st.Bath.bath13", backgroundColor: "#ffffff"
        }
// Chemical Mode virtual switch        
        standardTile("chemical", "device.chemical", width: 2, height: 2,  canChangeBackground: true) {
         		state "on", label: "Chemical", action: "chemicaloff", icon: "st.Weather.weather1", backgroundColor: "#aaffaa"
        		state "off", label: "Chemical", action: "chemicalon", icon: "st.Weather.weather1", backgroundColor: "#ffffff"
        }

// 3 way Valve Control
        standardTile("push9", "device.threeway", width: 2, height: 2, decoration: "flat") {
			state "main", label: "Main", action: "mainreturn", backgroundColor: "#aaffaa"
            state "cleaner", label: "Main", action: "mainreturn", backgroundColor: "#ffffff"       		 
            state "aerator", label: "Main", action: "mainreturn", backgroundColor: "#ffffff" 
		}
        
        standardTile("push10", "device.threeway", width: 2, height: 2, decoration: "flat") {
            state "cleaner", label: "Floor", action: "floorcleaner", backgroundColor: "#aaaaff"
            state "main", label: "Floor", action: "floorcleaner", backgroundColor: "#ffffff"
            state "aerator", label: "Floor", action: "floorcleaner", backgroundColor: "#ffffff"
		}
        
        standardTile("push11", "device.threeway", width: 2, height: 2, decoration: "flat") {
            state "aerator", label: "Aerate", action: "aerator", backgroundColor: "#ffaaaa"
            state "main", label: "Aerate", action: "aerator", backgroundColor: "#ffffff"
            state "cleaner", label: "Aerate", action: "aerator", backgroundColor: "#ffffff"           		
		}


// Refresh TIle Optional and currently not shown        
        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 1) {
            state "", action:"refresh.refresh", icon:"st.secondary.refresh"
        }

 // Pump Off Button Tile      
 		valueTile("push1", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "OFF", action: "speed0",
            backgroundColors:[    
                    [value:    0, color: "#dddddd"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
 // Pump 1000 button tile		
        valueTile("push2", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "1,250 RPM", action: "speed1250",
            		 backgroundColors:[    
                    [value:    0, color: "#ffffff"],
                    [value: 1250, color: "#aaaaff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
 // Pump 1250 button tile		
        valueTile("push3", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "1,500 RPM", action: "speed1500",
            		 backgroundColors:[    
                    [value:    0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#aaaaff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
// Pump 1500 button tile 		
        valueTile("push4", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "1,750 RPM", action: "speed1750",
            		 backgroundColors:[    
                    [value:     0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#aaaaff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
// Pump 2000 button tile 		
        valueTile("push5", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "2,000 RPM", action: "speed2000",
            		 backgroundColors:[    
                    [value:    0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#aaaaff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
// Pump 2500 button tile 		
        valueTile("push6", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "2,500 RPM", action: "speed2500",
            		 backgroundColors:[    
                    [value:    0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#aaaaff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
// Pump 3000 button tile 		
        valueTile("push7", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "3,000 RPM", action: "speed3000",
            		 backgroundColors:[    
                    [value:    0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#aaaaff"],
                    [value: 3450, color: "#ffffff"]
                    ]
             )
		}
// Pump 3450 button tile 		
        valueTile("push8", "device.carbonDioxide", width: 1, height: 1, decoration: "flat") {
			state ("default" , label: "3,450 RPM", action: "speed3450",
            		 backgroundColors:[    
                    [value:     0, color: "#ffffff"],
                    [value: 1250, color: "#ffffff"],
                    [value: 1500, color: "#ffffff"],
                    [value: 1750, color: "#ffffff"],
                    [value: 2000, color: "#ffffff"],
                    [value: 2500, color: "#ffffff"],
                    [value: 3000, color: "#ffffff"],
                    [value: 3450, color: "#aaaaff"]
                    ]
             )
		}

// Show what tiles are shown and in what order		
        main (["mainthing"])
		details(["switch","push9","push10","push11","auto","push2","push3","push4","push5","push6","push7","push8","push1"])
	
       
		}

}

// I do not think that this is required
def parse(String description) {
    def pair = description.split(":")

    createEvent(name: pair[0].trim(), value: pair[1].trim())
}

// command that happens if I push1
def speed0() {
    put(0)
    push(1)
    refresh()
}

// command that happens if I push2
def speed1250() {
	put(1)
    push(2)
    refresh()
}

// command that happens if I push3
def speed1500() {
	put(2)
    push(3)
    refresh()
}

// command that happens if I push4
def speed1750() {
    put(3)
    push(4)
    refresh()
}

// command that happens if I push5
def speed2000() {
	put(4)
    push(5)
    refresh()
}

// command that happens if I push6
def speed2500() {
	put(5)
    push(6)
    refresh()
}

// command that happens if I push7
def speed3000() {
	put(6)
    push(7)
    refresh()
}

// command that happens if I push8
def speed3450() {
	put(7)
    push(8)
    refresh()
}

// command that happens if I push9
def mainreturn() {
    push(9)
    valve(1)
    sendEvent(name: "threeway", value: "main")
}
// command that happens if I push10
def floorcleaner() {
    push(10)
    valve(2)
    sendEvent(name: "threeway", value: "cleaner")
}
// command that happens if I push11
def aerator() {
    push(11)
    valve(3)
    sendEvent(name: "threeway", value: "aerator")
}


// chemical mode virtual switch
def chemicalon() {
    sendEvent(name: "chemical", value: "on")
}
def chemicaloff() {
    sendEvent(name: "chemical", value: "off")
}
// auto manual mode virtual switch
def autoon() {
    httpPost(
		uri: "https://api.particle.io/v1/devices/${deviceId}/automode",
        body: [access_token: token, command: 1],  
	) {response -> log.debug (response.data)}
    sendEvent(name: "auto", value: "on")
}
def autooff() {
    httpPost(
		uri: "https://api.particle.io/v1/devices/${deviceId}/automode",
        body: [access_token: token, command: 0],  
	) {response -> log.debug (response.data)}
    sendEvent(name: "auto", value: "off")
}
// update position in smartthings without sending button push
def cleanervalveposition() {
    sendEvent(name: "threeway", value: "cleaner")
}
def mainvalveposition() {
    sendEvent(name: "threeway", value: "main")
}
def aeratorvalveposition() {
    sendEvent(name: "threeway", value: "aerator")
}

// button push messaging
private push(button) {
	log.debug "$device.displayName button $button was pushed"
	sendEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
}

// required to boot
def installed() {
	initialize()
}

// required to boot and store variables
def updated() {
	initialize()
    // custom atributes storage
    state.auto = 1    
    log.debug "device.auto: ${device.auto}"
    stae.chemical = 1
    log.debug "device.chemical: ${device.chemical}"
    state.threeway = 1    
    log.debug "device.threeway: ${device.threeway}"
}

// register the device having the desired amount of buttons
def initialize() {
	sendEvent(name: "numberOfButtons", value: 11)
}

// what to do if the device is polled
def poll() {
    log.debug "Executing 'poll'"
    getWATT()
    getRPM()
}

// what to do if the decice is refreshed
def refresh() {
    log.debug "Executing 'refresh'"
    getWATT()
    getRPM()
    getValvePosition()
}
    
// what to do if the main switch is turned on and off
def on() {
    speed3450()
}
def off() {
    speed0()
}

// get pool pump RPM from Particle
private getRPM() {
    // handle and store the data of the return
    def closure = { response ->
        log.debug "RPM request was successful, $response.data"
        sendEvent(name: "carbonDioxide", value: response.data.result)
        //  change the switch state if a power setting over 0 is set
        if (response.data.result > 0){
        sendEvent(name: "switch", value: "on")
        }
        if (response.data.result == 0){
        sendEvent(name: "switch", value: "off")
        }
        
    }
    httpGet("https://api.particle.io/v1/devices/${deviceId}/${RPMVar}?access_token=${token}", closure)  // what actually gets sent and returned from Particle
}

// get pool pump Power from particle
private getWATT() {
    // handle and store the data of the return
    def closure = { response ->
        log.debug "WATT request was successful, $response.data"
        sendEvent(name: "power", value: response.data.result)
    }

    httpGet("https://api.particle.io/v1/devices/${deviceId}/${wattVar}?access_token=${token}", closure)   // what actually gets sent and returned from Particle
}

private getValvePosition() {
    // handle and store the data of the return
    def closure = { response ->
        log.debug "Valve request was successful, $response.data"
        sendEvent(name: "valve", value: response.data.result)
        //  change the switch state if a power setting over 0 is set
        if (response.data.result == 1){
        sendEvent(name: "threeway", value: "main")
       }
        if (response.data.result == 2){
        sendEvent(name: "threeway", value: "cleaner")
        }
        if (response.data.result == 3){
        sendEvent(name: "threeway", value: "aerator")
        }
    }

    httpGet("https://api.particle.io/v1/devices/${deviceId}/valvepos?access_token=${token}", closure)   // what actually gets sent and returned from Particle
}
// Send a button push to particle

private put(button) {
	httpPost(
		uri: "https://api.particle.io/v1/devices/${deviceId}/${pumpFunc}",
        body: [access_token: token, command: button],  
	) {response -> log.debug (response.data)}
}

//Send Valve State
private valve(button) {
	httpPost(
		uri: "https://api.particle.io/v1/devices/${deviceId}/${valveFunc}",
        body: [access_token: token, command: button],  
	) {response -> log.debug (response.data)}
}