Version 4.0 is coming

[StefanoTesla]

As Santa Claus, I’ve made a gift for you too! Version 4.0 is on its way 🚀 !

First of all, it will have a new UI, but that's not all! Finally, the UI support translations into all languages (I need your help!)!

Under the hood 👁️ :

1. I’ve rewritten almost the entire software. In reality, I did a lot of copy-pasting, but the API side has been practically dismantled and made more readable, ASCOM 7 async functions are totally covered now!. I dropped out SPIFFS in favor of LittleFS, now module data is totally containerized, new server library.

2. The dome's roof (shutter) can now be controlled by a simple motor with reverse motion. 🤙🏻

3. The Cover Calibrator can now also handle a servo motor to open and close the telescope's cap, and you can use only the cap or only the flat panel or each togheter! 😮

4. Once the board has been tested, much more detailed documentation will be created. 🧾

5. The switches, except for the usual input/output and PWM ones, will offer two customizable switches with float values, so you can inject any value you want via API (temperature, humidity, or anything else). 🏎️

6. A PCB is in development, so you can have a proper board with no dangling wires. ‼️‼️‼️‼️‼️‼️‼️

[StefanoTesla]

Dome setting page with the new UI:

[StefanoTesla]

PCB is arrived!

I'm checking some last feature and then the version 4.0 is ready, probalby some function will not be ready on the first releas

[StefanoTesla]

board 0.03 is on the way, I'm improving the code implementing an object oriented way to handle the GPIO. 🚗
In this way input of the Dome or the Switch will have the same setting 🚀
I become a bit crazy, but now you can set the servo speed for open or close the cover of the telescope; 🐢
Thanks to the object oriented way this feature is bringed to the servo configured on the switch area, in this way we can set a speed olso for the switch servo speed (cover cap for guide scope?) 🗡️