Skip to content

Latest commit

 

History

History
166 lines (131 loc) · 5.27 KB

README.md

File metadata and controls

166 lines (131 loc) · 5.27 KB

Accel 22 Click

Accel 22 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

Click Library

  • Author : Stefan Filipovic
  • Date : Apr 2022.
  • Type : I2C/SPI type

Software Support

Example Description

This example demonstrates the use of Accel 22 Click board by reading and displaying Accel data (X, Y, and Z axis) as well as temperature and ADC measurements on the USB UART.

Example Libraries

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Accel22

Example Key Functions

  • accel22_cfg_setup Config Object Initialization function.
void accel22_cfg_setup ( accel22_cfg_t *cfg );
  • accel22_init Initialization function.
err_t accel22_init ( accel22_t *ctx, accel22_cfg_t *cfg );
  • accel22_default_cfg Click Default Configuration function.
err_t accel22_default_cfg ( accel22_t *ctx );
  • accel22_get_axes This function reads accel X, Y, and Z axis data in mg.
err_t accel22_get_axes ( accel22_t *ctx, accel22_axes_t *axes );
  • accel22_get_temperature This function reads the temperature in Celsius.
err_t accel22_get_temperature ( accel22_t *ctx, float *temperature );
  • accel22_get_adc This function reads the ADC voltage.
err_t accel22_get_adc ( accel22_t *ctx, float *v_adc );

Application Init

Initializes the driver and performs the Click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    accel22_cfg_t accel22_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    accel22_cfg_setup( &accel22_cfg );
    ACCEL22_MAP_MIKROBUS( accel22_cfg, MIKROBUS_1 );
    err_t init_flag  = accel22_init( &accel22, &accel22_cfg );
    if ( ( I2C_MASTER_ERROR == init_flag ) || ( SPI_MASTER_ERROR == init_flag ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( ACCEL22_ERROR == accel22_default_cfg ( &accel22 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

Reads and displays the Accel data (X, Y, and Z axis) as well as temperature and ADC measurements on the USB UART every 100ms approximately.

void application_task ( void )
{
    accel22_axes_t axes;
    // Wait for data ready indication
    while ( !accel22_get_int1_pin ( &accel22 ) );
    if ( ACCEL22_OK == accel22_get_axes ( &accel22, &axes ) )
    {
        log_printf( &logger, " X: %.2f mg\r\n", axes.x );
        log_printf( &logger, " Y: %.2f mg\r\n", axes.y );
        log_printf( &logger, " Z: %.2f mg\r\n", axes.z );
    }
    
    if ( ACCEL22_OK == accel22_enable_temperature_measurement ( &accel22 ) )
    {
        float temperature = 0;
        // Wait for data ready indication
        while ( !accel22_get_int1_pin ( &accel22 ) );
        if ( ACCEL22_OK == accel22_get_temperature ( &accel22, &temperature ) )
        {
            log_printf( &logger, " Temperature: %.2f C\r\n", temperature );
        }
    }
    
    if ( ACCEL22_OK == accel22_enable_adc_measurement ( &accel22 ) )
    {
        float adc_voltage = 0;
        // Wait for data ready indication
        while ( !accel22_get_int1_pin ( &accel22 ) );
        if ( ACCEL22_OK == accel22_get_adc ( &accel22, &adc_voltage ) )
        {
            log_printf( &logger, " ADC: %.2f V\r\n\n", adc_voltage );
        }
    }
    Delay_ms ( 100 );
}

Application Output

This Click board can be interfaced and monitored in two ways:

  • Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
  • UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.