3dhall14

---

3D Hall 14 Click

3D Hall 14 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : Stefan Filipovic
• Date : Apr 2024.
• Type : I2C type

Software Support

Example Description

This example demonstrates the use of 3D Hall 14 Click board by reading the magnetic field strength from 3 axes and the sensor internal temperature.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.3DHall14

Example Key Functions

• c3dhall14_cfg_setup Config Object Initialization function.

void c3dhall14_cfg_setup ( c3dhall14_cfg_t *cfg );

• c3dhall14_init Initialization function.

err_t c3dhall14_init ( c3dhall14_t *ctx, c3dhall14_cfg_t *cfg );

• c3dhall14_default_cfg Click Default Configuration function.

err_t c3dhall14_default_cfg ( c3dhall14_t *ctx );

• c3dhall14_get_magnetic_flux This function reads the raw values of X, Y, and Z axis and converts them to magnetic flux data in microTesla.

err_t c3dhall14_get_magnetic_flux ( c3dhall14_t *ctx, float *x_axis, float *y_axis, float *z_axis );

• c3dhall14_get_temperature This function reads the raw temperature value and converts it to Celsius.

err_t c3dhall14_get_temperature ( c3dhall14_t *ctx, float *temperature );

• c3dhall14_set_range This function sets the magnetic flux measurement range.

err_t c3dhall14_set_range ( c3dhall14_t *ctx, uint8_t range );

Application Init

Initializes the driver and performs the Click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    c3dhall14_cfg_t c3dhall14_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    c3dhall14_cfg_setup( &c3dhall14_cfg );
    C3DHALL14_MAP_MIKROBUS( c3dhall14_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == c3dhall14_init( &c3dhall14, &c3dhall14_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( C3DHALL14_ERROR == c3dhall14_default_cfg ( &c3dhall14 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

Reads data from the sensor and displays them on the USB UART every 200ms.

void application_task ( void )
{
    float x_axis = 0;
    float y_axis = 0;
    float z_axis = 0;
    float temperature = 0;
    if ( C3DHALL14_OK == c3dhall14_get_magnetic_flux ( &c3dhall14, &x_axis, &y_axis, &z_axis ) )
    {
        log_printf( &logger, " X-axis: %.1f uT\r\n", x_axis );
        log_printf( &logger, " Y-axis: %.1f uT\r\n", y_axis );
        log_printf( &logger, " Z-axis: %.1f uT\r\n", z_axis );
    }
    if ( C3DHALL14_OK == c3dhall14_get_temperature ( &c3dhall14, &temperature ) )
    {
        log_printf( &logger, " Internal temperature: %.2f C\r\n\n", temperature );
    }
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---