Print Thin Walls - No longer an Option

[Dwamies]

As per the title, the setting for Print Thin Walls, along with several others, has been removed completely by Ultimaker in Cura V5. This affects (at a minimum) the suggested print settings for the Tolerance Test.

What would be a good solution to stop people like myself from spending a large volume of time searching for a setting that isn't available? Maybe a simple notation after the suggested setting like:
Print Thin Wall: False (Cura V4 only)

Sauce: https://support.ultimaker.com/hc/en-us/articles/4792349488668-What-print-settings-have-been-removed-from-Cura-5-

I have never modified anything on Github really and I presumed it would not have been welcome for me to just go ahead and start modifying the Wiki?

[5axes]

Hello,
Thanks for your report, but As Print Thin Walls is still a parameter ,of V5 as well as 5.1 NO please don't modify anything. On top of that as the Print Thin Walls give access to parameters not easy to understand in V5 it's higtly recommanded to live it unchecked , in order to keep the default behaviour of Cura in most of the case (My point of View) .

Cura 5.0

Cura 5.1

Now if you have the reference of real parameters, no longer available in V5.0 and mentioned in the documentation, Please don't hesitate to report them.